8, Sep 2022
Slab Leak Plumber Chatsworth CA

The best way to deal with water damage is to prevent it. However, slab leaks can be difficult to avoid, especially in older homes with old piping. For this reason, you should make sure to call a Slab Leak Plumber in Chatsworth CA as soon as you notice any leaks.

Repairing a slab leak

If you’ve discovered that your basement has a slab leak, the best thing to do is to call Candu Plumbing of Chatsworth. Luckily, slab leak repair is much easier than you might think. In many cases, repairing the leak can be accomplished by jackhammering out a section of concrete that contains the leaking pipe, then cutting it out and replacing it. If you’re unsure of how to go about this, consider hiring a professional plumber.

Before you can do anything, you need to locate the leak. If you don’t, you’ll likely end up with several holes in your concrete floor, and a big mess inside of your home. Professionals use different tools to help them pinpoint the leak. They’ll trace the copper line under the concrete floor, listen to the sound of the water, and use infrared thermometers to narrow down the source of the leak.

You should contact a professional plumber as soon as possible after you suspect a slab leak. A plumber will be able to identify the exact site of the leak, which is crucial. Once you have pinpointed the leak site, your plumber will cut out and replace only the section of copper pipe that is leaking.

The best way to prevent slab leaks is to keep your pipes clean and well-maintained. If you don’t do this, you’ll end up paying more for repairs.


Hydro-jetting for slab leaks is a great option for repairing a wide variety of drain and sewer problems. The process uses high-pressure water to clean pipes and is environmentally friendly. It is also less expensive than traditional pipe cleaning methods. Hydro-jetting is also an excellent way to prevent future sewer problems. It can remove tree roots and other debris that may be blocking the pipes and drain.

Hydro-jetting is the best method for clearing clogs, preventing overflows and backups. It cuts through almost anything, from grease to tree roots, leaving your pipes sparkling clean. Hydro-jetting will also help remove any stubborn clogs that have built up over time.

Hydro-jetting uses high-pressure water to clear clogs and create smooth pipes. The process is environmentally friendly and safe. In addition, it is a fast, cost-effective way to repair slab leaks. If you have a slab leak or crack, call a professional hydro-jetting service in Carrollton, TX to clean your pipes.

Hydro-jetting is best performed by a trained professional plumber. These technicians have advanced tools and experience to safely and effectively clean drains. The plumber will first insert a hose tied to a large water tank or water line and then shoot a water jet stream into the pipes. The high-pressure water helps push out debris and other blockages in the pipes.

Choosing a water heater

The choice of water heater is one of the most important parts of your home plumbing system. It is responsible for heating all of the hot water in your home. Choosing the right one for your home is not an easy one, so it is best to have some advice before purchasing one.

If you suspect that your home has a slab leak, you’ll want to test the hot and cold water heaters to see if they are operating properly. Check for a warm spot on the floor and a quiet hissing noise in the water. If these signs are present, call a plumber in Chatsworth CA to perform the repair.

A traditional tank-style water heater can only last 10 to 15 years, but newer models are designed to be more durable. Some of these units last 20 years and longer. If your water heater is more than 15 years old, you may have to replace it with a plumber. While the older models are still functional, you might need to replace them.

If your water heater has a pressure relief valve installed, this should release water into the overflow drainpipe if the pressure in the tank is too high. It is also important to make sure that the temperature on the thermostat is at 120 degrees to avoid overheating.

Candu Plumbing of Chatsworth
9726 Variel Ave, Chatsworth, CA 91311
(818) 492-3067